Hot Rod Model A build

	What we started with
	Frame and suspension Frame Part II Frame, part III Including shocks and head light mounts, and motor mounts.
	To pinch or not to... It is not necessary to pinch a 1932 frame to accept a '30-'31 body, but I think one should, and here is why...
	Chop
	Engine and Transmission Including carburetion options and accessories
	Wheels and Brakes Including pedal assembly
	Exhaust
	Dashboard Including gauges and steering column
	Interior
	Electrical and Heater
	Various Mock up stages ...this one being an early one!
	Body and sub-rails Body Part II Body, part III Body, part IV Body part V Roof Insert Firewall Including floor, trunk with gutters, and tank
	Well, how did it come out?

The bible of traditional hot rodding how to...

Home | About | Contact | FAQ

This web site is best viewed in 1024 X 768
If you don't have a big enough monitor, get one from our sponsor Pacific Lawrence Company, Inc

All registered trademarks are the property of their respective owners. We reserve the right to edit, refuse or delete any submitted content.
Any work performed or suggested on these pages are to be made by professionals only. Do not attempt to perform work that you are not qualified or trained for. Do yourself a favor: Restore or preserve a classic car, build a Hot Rod or motorcycle.. .then DRIVE them!

Professional driver on closed course. Results not typical. Do not attempt. Do not take internally. Listen to your mother. Do not operate heavy machinery while intoxicated by this web site.