Project ’37 Ford Cabriolet, exhaust

Project 1937 Ford Cabriolet came with a stock single exhaust and it was hitting the frame so I had to remove it anyway. I decided to start from scratch.

1937 Ford Cabriolet exhaust flanges

These are the old pipes, they look a bit tired.

 

1937 Ford Cabriolet  exhaust flange new

I kept the flange and went to work.

1937 Ford Cabriolet spagetti

Look, a 1937 Ford exhaust. What, you can’t see it?? Well, let me show you.

1937 Ford Cabriolet exhaustThese are the smallest Thrush glass packs I could find.

Thrush had an ad in the sixties that said: Put a Thrush on your pipe and…smoke it! I doubt we can smoke anything with this stock flathead but I am counting on some good flathead sound emanating from the dual pipes.

I could not resist adding for the electric cut-outs. I am sure with these small glass packs I will have a nice rumble out the rear but there might be a time when an uncorked flathead will be music to ones ears. Off road of course. They come with wiring and one switch that opens both simultaneously. Yes, I did test them, they work on 6 volts as well. The switch looks like a modern power window switch so obviously I would have to hide it under the dash.
1937 Ford Cabriolet Exhaust work 3

The angle iron: Your best friend when making exhaust.

1937 Ford Cabriolet Exhaust work

It is great to line up tubes when you are going to weld them together. I tacked everything together first and then did a test fit on the car.

 

1937 Ford Cabriolet exhaust cut outs

The exhaust cut-outs are designed for 3 inch exhaust pipes. The dual system I am building is based on 1 1/2 inch pipes so we have to be a little creative.

1937 Ford Cabriolet exhaust set up

The mufflers and exhaust cut outs needed to be compact so I came up with the idea of cutting down the muffler and insert it in the Y-pipe.

 

1937 Ford Cabriolet exhaust set up finished

Here is the compact solution, the world famous Super Sonic Muffler Cut-Out Device.

1937 Ford Cabriolet exhaust tip polish

The last 36 inches of the exhaust is stainless so I polished it to chrome finish. Now I don’t have to worry about adding chrome tips.

1937 Ford Cabriolet exhaust paint Once all welded up I coated everything with high temp paint. Yes, I wear a respirator even when painting with spray cans. Most paint spray cans contains nasty stuff. You only have one pair of lungs.

1937 Ford Cabriolet exhaust finished

Here it is. A complete 1937 Ford dual exhaust system.

1937 Ford Cabriolet exhaust insulation

It is tight on the drivers side because of the steering box. I have to dip down below the frame and that makes part of the exhaust close to the master cylinder. I added insulation to the pipe to keep the heat away from the master cylinder.

1937 Ford Cabriolet dual exhaust Here is a side view of the exhaust.

1937 Ford Cabriolet exhaust tip

Well, here we are. All done. A drive around town confirmed a nice mellow note. Also the restored plate is in place and a vintage frame adds the finishing touch.

Ready for the up-coming Ford Meet.

1937 Ford Cabriolet – walls of white

1937 Ford Cabriolet White Walls

The rims were treated to powder coating in gloss black and then the new look-like-bias-ply radials were installed. Looks great.

 

1937 Ford Cabriolet V8 wheel cover

The stock reproduction caps were in perfect condition but they are rather boring. I found these on that auction site. They are old stock and after some polishing they look very nice. I added gloss black to the V8 logo that matches the rim color. I am not sure if they were a Ford or Mercury item or possible an aftermarket. If you know, let me know.

1937 Ford Cabriolet white wall tire

Of course I can’t want to see the caps on the rims so by laying on the floor we can get a sense of what we are looking at.

1937 Ford Cabriolet in the air

With five blades removed from the rear spring I think I got the rear sitting right. It centers the tire in the wheel well. I think the front need to come down a smidge.

1937 Ford Cabriolet white wall centered

Like that!

1937 Ford Cabriolet exhaust

Since I got the car up in the air it’s time to attend to the exhaust system. A stock single exhaust is no way to treat a flathead engine. The plan is for an all new dual exhaust with remote electric openers. It may be fun to make a little noise from time to time. The short glass packs should ensure a nice rumble from said flathead when going through the 1939 syncromesh transmission during cruising…and cruise we will !

 

1937 Ford Cabriolet stainless pipes

Instead of adding chrome extensions to the rear of an exhaust i opted for 1 1/2 inch stainless pipes for the last bit of the exhaust. As you can see I had to test polish and it will look good when done.

I have another hot rod to work on so…more later…

Sneak Peak at the Roller Nailer

This hot rod is coming together nicely. With chrome offset by shiny black paint it will be a pretty snazzy car and with a stump puller chromed out 425 Buick Nail head, 4 speed and 9 inch limited slip rear…it will be a handfull.

As always, the devil is in the details…so here are some details:

Close up of truck hinge. Slotted screws are used for the old timey feel and the material is polished stainess for the looks.

Trunk handle and Lucas license plate light.

Maybe we will show more of this car…maybe…

Harry’s “back in the day” Hot Rod Pictures

I bought a vintage Volvo from Harry and his wife a few years ago. I learned that he has been a car guy and hot rodder all his life and here are some pictures to prove it.

Gotta love this stuff:

A Mopar 413 Ramcharger powered this red hot rod. The stick figure in the front is Harry himself.

With a ride like this it was not a problem to atract the ladies.

Just love the stance and look of old hot rods.

The hot rod started life with a different color. Check out the two color top insert.

 

More evidence that the ladies dig guys with hot rods…

A completey restored 1937 Dodge truck was the ride of choice for a while.

One of the earlier cars Harry owned was this 1926 Ford Model T. Bought it for $150.00 and sold it for $300.00. They only car he made money on!

Thanks Harry for sharing your time machine with us.

Let’s go to the swap meet…

Swap meets are great. Parts and vehicles for sale with something for everyone.

 

Here is a very manly 4X4. All of the truck was powder coated. Very nice. Displayed by a powder coat company.

 

1948 Chevrolet sedan delivery. Total restoration and for sale for $16,500.00. You could not restore one for that.
Model A truck project
Another manly truck.
There is that word again. I wonder if it’s a complex issue?? I may have to talk to my psychiatrist…or bartender…they do the same thing.
1973 Fart…ahem, Fiat convertible
Super clean model  A roadster
Street Rod thingie
Very clean 60’s Chevrolet truck
Straight and complete model A roadster pick up. You can haul stuff and get a tan at the same time!
.
This swap is one of my favorites. Here are some two wheeled reasons:
1907…something-something. Forgot the brand. Cool bike, though…
Cool Indian project
How about a Harley Davidson for $500.00? Pretty decent and could be a runner.
Like new 1974 Kawasaki 900. Mint condition. Love that color!
You meet the nicest people on a Honda…or?
1974 BMW R-90 with side car. That seat and the Hella light looks a little out of place but a beatiful bike and color combo.
Ariel. Don’t know the vintage.
Very nice 1946 Indian
If one carburator is good three must be better! For a Chevrolet small block.
There you go, another swap in tha bag. Looking forward to the next one.

Still Out There, Part IV

More junk:

We just love old cars in the wild. They are Still Out There

These pictures are for your entertainment purposes only. We DO NOT know where these cars are so don’t contact us and ask. WE DON’T KNOW.

We just love old cars in the wild. They are Still Out There

These pictures are for your entertainment purposes only. We DO NOT know where these cars are so don’t contact us and ask. WE DON’T KNOW.

Still Out There Part III

We just love cars in the wild. They are Still Out There

These pictures are for your entertainment purposes only. We DO NOT know where these cars are so don’t contact us and ask. WE DON’T KNOW.

We just love cars in the wild. They are Still Out There

These pictures are for your entertainment purposes only. We DO NOT know where these cars are so don’t contact us and ask. WE DON’T KNOW.

We just love cars in the wild. They are Still Out There

These pictures are for your entertainment purposes only. We DO NOT know where these cars are so don’t contact us and ask. WE DON’T KNOW.

 

Still Out There: Ford

We just love cars in the wild. They are Still Out There

These pictures are for your entertainment purposes only. We DO NOT know where these cars are so don’t contact us and ask. WE DON’T KNOW.

 

These pictures are for your entertainment purposes only. We DO NOT know where these cars are so don’t contact us and ask. WE DON’T KNOW.

Still Out There: Chevrolet

Still Out There: ChevroletsWe just love cars in the wild. They are Still Out There

These pictures are for your entertainment purposes only. We DO NOT know where these cars are so don’t contact us and ask. WE DON’T KNOW.

Still Out There: ChevroletsStill Out There: ChevroletsStill Out There: Chevrolets

Still Out There: ChevroletsStill Out There: ChevroletsStill Out There: ChevroletsStill Out There: Chevrolets

These pictures are for your entertainment purposes only. We DO NOT know where these cars are so don’t contact us and ask. WE DON’T KNOW.