This bike had definitely been beaten with an ugly stick but it runs good. My plan for this bike was just to ride it over the summer to evaluate it and then I would build something cool. I was thinking a bobber style bike.
I just could not live with all the farkels so after an evening in the shop, the bike lost close to 75 lbs. Lighter = faster, right?
So here is bike 1.0 and I thought I could live with it for a season.
I figured I would just do a quicky budget job on the bike, fix the seat and maybe spray bomb the tank so it looks a little better.
This is the stock rear sub assembly. Anything not needed including the lock assembly will be chopped off.
I shortened the rear hoop. I originally planned to use part of the seat foam but that got scrapped. More on this later.
I kept part of the stock front pan as it fits well to the tank but I added a new seat pan to fit the rear frame.
Since I don’t have an English wheel…hell, I don’t even have a Swedish wheel !! so I decided to just create the hump with sheet metal and spend some time hammering in to shape.
A little mud, a little primer and we got a pretty good looking tail piece.
Since I got a new rear end I decided to give the tank some attention as well.
The yuge stock battery was located right in the middle of the frame. I would like to open up that area for that minimalistic look.
Talk about diet!! The original battery weighs 20 lbs! It is also 17 years old! Maybe time to replace it? The lithium unit on the right is less that half the size and weighs a whopping 3.1 lbs! It is also good for 370 Cold Crank Amps.
The new battery will be housed in the new tail hump.
The plan was just to put a flat paint on the tank and tail hump but the flat clear came out kind of hazy so with nothing to loose I leaned in to it with a buffer.
Hey, that looks pretty good.