1937 Ford Cabriolet – walls of white

1937 Ford Cabriolet White Walls

The rims were treated to powder coating in gloss black and then the new look-like-bias-ply radials were installed. Looks great.

 

1937 Ford Cabriolet V8 wheel cover

The stock reproduction caps were in perfect condition but they are rather boring. I found these on that auction site. They are old stock and after some polishing they look very nice. I added gloss black to the V8 logo that matches the rim color. I am not sure if they were a Ford or Mercury item or possible an aftermarket. If you know, let me know.

1937 Ford Cabriolet white wall tire

Of course I can’t want to see the caps on the rims so by laying on the floor we can get a sense of what we are looking at.

1937 Ford Cabriolet in the air

With five blades removed from the rear spring I think I got the rear sitting right. It centers the tire in the wheel well. I think the front need to come down a smidge.

1937 Ford Cabriolet white wall centered

Like that!

1937 Ford Cabriolet exhaust

Since I got the car up in the air it’s time to attend to the exhaust system. A stock single exhaust is no way to treat a flathead engine. The plan is for an all new dual exhaust with remote electric openers. It may be fun to make a little noise from time to time. The short glass packs should ensure a nice rumble from said flathead when going through the 1939 syncromesh transmission during cruising…and cruise we will !

 

1937 Ford Cabriolet stainless pipes

Instead of adding chrome extensions to the rear of an exhaust i opted for 1 1/2 inch stainless pipes for the last bit of the exhaust. As you can see I had to test polish and it will look good when done.

I have another hot rod to work on so…more later…

Let’s continue on Project ’37 Ford

As spring is fast approaching the pressure is on to get the Cabriolet ready.

Whitewall, dual exhaust, side mirror, full service and other small things will make this a nice cruiser. So let’s get started:
1937 Ford Goddies

Santa came early…or late…depending on if you are a glass half full or half empty kinda person. As much as I like things with a little patina and some history I also have a soft spot for nice new chromie thingies!! Outside mirrors, glove box, radiator cap, tank lid, battery holder downer (technichal term) and more.

1937 Ford Cabriolet Torpedo with mirrors

Mirrors installed. The enclosed hinge pin did not fit these hinges so I just made a pin. With the small back window in the convertible top the mirrors will be a welcome addition. The glass in these reproduction mirrors are not wide angle so they are still limited in what you can see. We will see how well they work once on the road. BTW: Check out that super cool torpedo hood!! This baby is sporting some LINES !!

1937 Ford Cabriolet Whitewalls.jpg

Man, Santa came again. He is a busy man…in the middle of April. Probably bored…

This time he brought snow white colored white wall tyres. How nice! As much as a car like this is predictable with white walls I still think they will be the cat’s pajamas on this maroon cabriolet. I plan to powder coat the wheels black and add a nicer Mercury style cap. I will keep the trim rings as well. Reliable sources tells me that more chrome and shiny stuff makes the car run better, faster and smoother. Honest!

1937 Ford Cabriolet tank lid

 The lockable filler cap is a nice option but what an ugly contraption, eh?
I opted for a smooth new one.

1937 Ford Cabriolet new tank lid
Mo betta! Strange reflection, though!

 

1937 Ford Cabriolet glove box

 There would not be a place to put my gloves unless there is a glove box.
I got this snazzy reproduction part but I realized quickly why the restorer/builder did omit it. They worked really hard on making the car look original. The original car did not have a voltage regulator but the more contemporary ABA flathead came with a generator that uses the more reliable but separate voltage regular. By now you have figured out where they hid said voltage regulator. Yup, where the glove box goes.

I have to move the regulator, maybe even to the engine compartment as it is not a big deal to me if the car looks totally stock. I do however like a place to put my gloves!

 Mo later…

Let’s detail the 1937 Ford

The last weekend offered temperatures in excess of seventy degrees, something that is unheard of in Late March in this part of the country. Needless to say it would be a felony to leave an open car in the garage under such circumstances…not to mention the fact that the open car in question is a super cool flathead powered 1937 Ford Cabriolet!

Anyway, the car got some miles on it and the only problem I encountered was to wipe that stupid grin off my face but the weekend is over and it is time to look over this beauty. I need to detail it, do a service and check general tune of the car so it’s ready for action this summer season.

1937 Ford Cabriolet art deco nose

How can you NOT like this Art Deco style?

1937 Ford Cabriolet clean rear

Daum…this thing is clean in every corner. I am not a big fan of blue dots but they will stay for now.

1937 Ford Cabriolet headlight

Love this! OK, I am getting a little too excited now. Let’s get back to work.

I am sure you have seen those ads for some snake oil miracle paint rejuvenator or some other auto detail product: They usually have a slightly faded but super straight rust free 1967 Camaro Z-28 or a 1970 Hemi Charger they just found in a barn and all it need is a detail. Yeah right??
If and when
I find a Hemi Charger in a barn it would be rusted up to the door handles, the engine replaced with a stuck slant six and the interior would have been eaten alive by various animals who made it their home (and toilet!)  Sure, that will BUFF out !

Anyway, THIS car is actually like that snake oil car. It just need a proper detail and it should really make for a nice 1937 Cabriolet. The reason for this is of course the fact that it was completely restored and not driven much since then. That kinda helps!!
1937 Ford Cabriolet up in the air

Well, let’s get this thing jacked up…so to speak. After removing the rolling stock I get a chance to see the suspension properly and I can only confirm that everything seems to be in great shape.

1937 Ford Cabriolet clean suspension

The wheel wells also looks very nice and clean. All brackets have been cad plated and all rubber seems fresh. I can’t complain.The fenders have a rubberized coating under them to protect them from “tned”. That is “dent” backwards. That is what you get when a rock leaves the tire at high speed and makes a dent from the inside. Dent but backwords = tned. Now you know…

 

1937 Ford Cabriolet brakes

After removing the drums I discovered new brake shoes and hydraulics so there was nothing for me to other check adjustment. My work is done here.
1937 Ford Cabriolet banjo wheel

When did you last time polished between the spokes??
1937 Ford Cabriolet license plate

A swap meet visit yielded this vintage license frame for $15.00. It will help dress up the restored 1937 WA plate. I think I need to make a backing plate for this as well since it sits on top of the post with the backside exposed.

1937 Ford Cabriolet tires

I plan to add wide white walls to this car but the tire I want is on back order so I have to roll on these black walls for now. That will not be a problem as the Pirelli piecrust tires are in great shape. Kinda cool, actually…

More later…