BMW Cafe Racer Build, Part IIII

The summer in the North West have been absolutely perfect for anyone enjoying motorcycles…and dry roads!

I have been busy riding the BMW Cafe bike to the point I have not spent much time working on it. I am really liking how it handles and the power available mostly because of the serious diet I exposed the bike to.

Like any project, there is always room for improvement especially on this bike as it was a quick build. Just in time for the monthly backfire moto meet in Seattle, I got this snazzy Monza style gas cap.

 

Made in Germany, it offers excellent fit and finish. It also added about 12 horsepower.

 

I am using the small Harley blinker for tail and stop light and they were not very bright. One of the most important things you can do on a motorcycle is to be seen!

I installed these super bright LED bulbs and I probably increase the output three fold while using less load on the electrical system.

Riding a stripped down bike means that there is no place to put things and I have to at least have some tools, right?

I found this tool box at a swap meet, I was told it was from an Honda. It ended up under the seat for now. I may move it to the front of the frame, behind the fork, we’ll see.

 

It holds all of the BMW factory tools.

I replaced the valve covers with a set of the older style valve covers, they definitely changes the vibe of the bike. Next…I would like to change the gauges, we’ll see what I can come up with.

BMW Cafe Racer Build, Part III

Seat Upholstery

The rear hump need a snazzy padded area for my rump to land on when I twist the throttle on this 1000 cc German powerhouse!. This is a thin wood board and carriage bolts will hold it in place.

Anti-spin! I tacked these thin metal strips to the carriage bolts so they would not spin when I snug up the bolts.

I used soft 1 inch foam here and wrapped it with black vinyl.

Here we are waiting for the contact cement to get tacky. This is not the first time this website get tacky. (Stolen joke from the muppet show)

In retrospect, (there is always retrospect when doing new things) I would have built this seat differently. I would have just made a pan that goes on top of the seat and just covered the pan. Oh well, this is how we learn. Now I will cover front and rear and then make a pad in the center. At 100 mph it will look just fine.

This is Landau foam. Same stuff goes under the vinyl on your grandpa’s Cadillac. It is also called upholstery bondo! I use it to smooth out or soften the subject before vinyl.

With vinyl.

For some interest, I will use this pleated vinyl for the seat portion. As the seat will be lower than the stock seat I opted for high density foam. I hope it will be comfortable enough.

I am not pleased with this but I will live with in for now.

So how did it come out?

Pretty damn good for a quicky!

With a full tank of fuel it weighs 360 lbs! The stock R100 is listed at 478 lbs.

The homemade shortys offers a hard knock sound with a buffalo fart during shifts and snap, crackle and pop on deceleration. Love it!

The vintage looking tires looks just at home on this bike. It handles great and have tons of power.

 Let’s RIDE!

The work continues, part IIII here

BMW R100 Cafe Build, Part II

After polishing, Mr. Humpty-Dumpty rump looks pretty good as well.

For those of you that are old enough to remember The Fixx’s song “one thing leads to another…that’s just how it goes…one thing leads to another.

With my new snazzy rear end I could not clutter it up with a fender, tail lite or a license plate. I think I will mount the plate on the axle.

Yup, axle mounted license plate it is. The license light will be hidden under the seat.

 

Now the front fender is all the sudden too big. Also, that stainless bracket is totally overkill. So, bring on the diet program again.

 

The fender got a good haircut and I removed everything on the bracket that did not look like a bracket.

BMW used carriage bolts coming from the underside of the fender with ugly nuts and threads on full display on top of the fender. I reversed that using polished stainless carriage bolt for a smooth look. Besides, shiny stuff make the bike go faster.

As mentioned earlier,  I don’t want to clutter up the rear with a tail light. These are small Harley blinkers. I reworked the inside so it will accept a dual filament bulb. They will be responsible for tail light and stop light function…maybe even double as blinkers to!

 

The stock aluminum rims are in good condition but rather dull. Bring on the aluminum polish.

 

There, mo betta! Shiny good!…Also, new tires on both ends. These skinny ass tires with vintage tread pattern look right on this build.

 

This is the brake pedal and I took it off just to clean it. All the sudden I can’t live with that casting line. So…

 

Some grinding, sanding and buffing and we got ourselves a snazzy shiny pedal. As you know, shiny parts will increase power and speed.

 

I told you this was a budget build…no need to buy shorty mufflers. I took a hacksaw to the stock mufflers and made economy shortys or as some call them, Poor Man’s Rineharts” These pipes also gave the bike it’s name: “Loud mouth”

BMW Cafe Racer Build, part 3

Mellanspel

“Mellanspel” is Swedish and directly translates to “Middle Play” as in something you would do in between. I am in the midst of a full on rotisserie restoration of a 1961 Volvo P1800. Doing a big restoration like this sometimes requires some “mellanspel” to keep your sanity.

I took a break from riding when I had back surgery but now when I am doing OK I decided to get back in to riding again. A world famous motorcycle philosopher once said: Four wheels move the body, two wheels move the soul”

I picked up a very nice original BMW R60/5 and it has been a great joy to be back on two wheels. Riding the R60 for a while I have come to appreciate the simplicity and the solid ride on these bikes. At the same time I got bitten by the cafe racer bug but cutting up this virgin R60 is not an option, besides, if I am going to race from cafe to cafe I need more powaa!!

So what to do?? A Mellanspel Project!

1977-bmw-r100-slash-7-motorad

So here is the “Mellanspel” project. A 1977 R100 bought from the 83 year old original owner. Needless to say, he did not worry about cosmetics but he changed oil every year in the 75K it has traveled. Runs strong.

1977-bmw-r100-slash-7-motorad-busy-rear

This must be the ugliest motorcycle rear that I have ever seen. Originally I figure I would ride it for a while just to get to know it but I can’t see myself riding around with all those “things” so I decided to at least strip the bike of anything not essential. You know, the old race trick: remove anything not needed to run.

1977-bmw-r100-slash-7-motorad-ugly-fairing

If you look up “ugly fairing” in the dictionary there will be a picture of this.

1977-bmw-r100-slash-7-motorad-naked-bike

Just removing all this junk it looks like a motorcycle again.

1977-bmw-r100-slash-7-motorad-chopping

This will probably get me banned from the BMW club but less is more. This is just a quicky job, the whole bike needs to be properly torn down and build right but it’s kinda fun to hack away a little.

1977-bmw-r100-slash-7-motorad-farkels

Pretty good pile of farkels.

1977-bmw-r100-slash-7-motorad-naked-and-better

I know, this is NOT a cafe racer yet but after shredding close to 100 lbs it sure looks better and should scoot along just fine. I also replaced the handlebars with a shorter version for an all business look. It rides great and now I can spend a month or so getting to know it before I tear it down.

1977-bmw-r100-slash-7-motorad-on-lift

Ergonomics Galore!

With a 25% off coupon this motorcycle lift came to $322 from that tool company. Hell, I could not get the materials to build one myself for that. What a back saver.

This should be a fun winter project. Zoom-Zoom!