1957 Chevy truck project, part 4

Somewhere along the lines of this project I decided to do some body work and then I shot the truck it hot rod matte black. I am not a fan of the “rat rod” look but I prefer it was uniform than spot painted. I left the interior in the Cadillac Poly green metallic as I think it is a nice color and it may get that shade added later.

1957 Chevrolet truck hot rod project

Since this is going to be a driver,  I added spray on protective bed liner.

 

20150808_155710

Once I got it rolling again I brought it out for the whole picture look. Those polished Americans Racing wheels with rubber band tires ain’t makin’ it!!

As much as I like shiny stuff it has to be the right shiny stuff. A friend told me that there was a time when hot rodders thought that adding polished Americans will beautify anything. I bet that is true but it sure does not work right here in my driveway.

Traditional style have been popular for some time now and it is over used as well but is also timeless so let’s go with that.

Just like Clint Eastwood can draw his trusty 45 faster that any of the bad guys I can draw my Visa card. Swoosh! …and there it was next to the lap top.

1957 Chevy truck chrome wheels

A week later the brown truck stopped by and gave birth to these!

 

20150826_180822

15X6 for the front and 15X7 for the rear, chrome OE steel wheels. OE stands for Original Equipment as in stock style wheels. Much better!

Well, let’s pop them on and have a look see shall we?

1957 chevrolet truck

1957 Chevrolet truck hot rod

2015-11-13 14.10.21

Much better. After alignment and charge of the A/C system I got myself a great parts chaser.

1957 Chevy Truck project, part 3

1957-Chevrolet-Hot-Rod-Pickup-truck seat base

I found a pair of aftermarket bucket seats on Craigslist and I built these seat bases for them.  I lost the glove box because of the A/C so I installed this lockable drawer under the frame. I is actually a Bulldog gun vault so it is plenty strong. A perfect place for valuables and paperwork.

1957-Chevrolet-Hot-Rod-Pickup-truck carpet in

Carpet in place. The rear wall was covered with sound deadener and then carpeting.

1957-Chevrolet-Hot-Rod-Pickup-truck kick panel

We need tunes and for that we need speakers. The speakers speak the tunes, that’s why they call them speakers. They are permanently mounted in this kick panel made from textured automobile panel. If they were not permanently installed you would call them guest speakers.

1957-Chevrolet-Hot-Rod-Pickup-truck kickpanel installed

Kick panel in place and kickin’ it.

1957-Chevrolet-Hot-Rod-Pickup-truck console between

Cell phone fits perfectly behind the rear cup holder and the charging/AUX connectors. Now I need a tripple latte’

1957-Chevrolet-Hot-Rod-Pickup-truck seats in

A throne for a king.

1957-Chevy-Truck-radio-install

The previous owner had a smoothie attack. The dash was filled…for what? Where am I going to put my tunes?? How about right here!!

1957-Chevy-Truck-tach

The radio is vintage looking but with modern guts. The radio offers AM-FM and it is connected to the AUX jack in the center console. Tachometer is a vintage unit from Dixco.

More later…

1957 Chevy Truck project, part 2

Since I am going with bucket seats for now I need a mid console.

1957-Chevrolet-Hot-Rod-Pickup-truck armrest

This is the armrest from an old Volvo center console. I had it recovered in leather. Leather = good!

1957-Chevrolet-Hot-Rod-Pickup-truck center console

Frame for console.

1957-Chevrolet-Hot-Rod-Pickup-truck cup holder

Cup holders….cup holders, man…gotta have cup holders! Found these stainless units on the great interweb. They have a lot of stuff there.

1957-Chevrolet-Hot-Rod-Pickup-truck cup fastener

The cup holders did not have a way to be held in place so I added a stud and made a c-clamp.

1957-Chevrolet-Hot-Rod-Pickup-truck phone charger usb

Phone charger with USB and AUX jack.

1957-Chevrolet-Hot-Rod-Pickup-truck cup holders

This is Landau foam.Yup,the same stuff that is under your grandpa’s Cadillac vinyl top.

1957-Chevrolet-Hot-Rod-Pickup-truck center console vinyle'

1957-Chevrolet-Hot-Rod-Pickup-truck center console finshed

I re-used the 1957 cigarette lighter as a power outlet as well. Console done and ready to offer a supporting roll in this truck’s future endeavors.

 

1957 Chevy Truck project, part 1

One lousy garage sale!

I like “garage sailing” but my life is so busy that I really don’t have time for it. Also, most garage sales offer things that I don’t need, like telefones (remember those?), worn out toys and casette players.

On my way home on a Saturday morning I saw this “Moving Sale” sign and it was close to my house so…what the hay…I swung in.

It took me all of thirty seconds to confirm that I did not need anything layed out on those rickety camping tables. I turned around to leave when I spotted a dirty 1957 Chevrolet truck sitting under a car port with the bed full of junk.

1957-chevy-truck-dirty

Of course I had to open my mouth and ask: Is this thing for sale??

1957-Chevrolet-truck-side

After a good scrubadub it look pretty decent.

1957 Chevrolet truck, 383 stroker and automatic transmission. A Lincoln Versailles nine inch rear axle put the power to the ground and offers disc brakes in all corners.

Front end is the tried and true Mustang II setup with rack & pinion power steering. The rear axle is held in place by four link rear suspension with coil-over shocks. Fuel is stored in a 17 gallon aluminum tank under the bed.

Rolling stock are polished American Racing 17 inch rear wheels and 16 inch in the front with silly looking rubber band tyres.

1957-Chevrolet-truck-rear-side

The Polish-Americans…ahem, polished Americans need to be…well… polished and the paint is starting to haze a bit. It is obviously missing the grille.

1957-Chevrolet-truck

Total street rod treatment. Filled bed rails and smooth tailgate. Not really my cup of tea but it’s OK. Amateur paint job makes it a driver.

1957-Chevrolet-truck-interior1

The previous owner did not redo the stock bench seat and that’s OK with me, I got some ideas.

What I don’t care for are all those mandatory “street rod” components added for no functional reason. The ugliest thing is probably the “steering column cover” Why would you be embarrassed over a column anyway?? It has a FUNCTION!

1957-Chevrolet-truck-383

Engine compartment looks like all the rest of them. Red engine with some chrome added. Booooring !!

The all new 383 stroker runs strong but needs some attention. It has a rough idle or some sort of low rpm balance issue. We all have some issues, right?

tach

This “tach pod” is the tachiest thing I ever seen! Get it??!! Looks like a ball sack!…with one ball;-) BTW, this tachometer is completely made of plastic. It was almost a surreal feeling when I took it out, like earth lost half of its gravity!

So the initial though was just clean it up a bit for the summer and just drive it…but…. Maybe I should just remove some of the obvious street rod stuff and then drive it…right?

Yeah, right…here goes nothing:

1957-Chevrolet-Hot-Rod-Pickup-truck-carpet2

Looking at it, I need to do more…That horrible steering wheel, billets shifter, billet knobs and the under dash thingie has to go. The “everything beige” theme looks so 2004! Actually, it reminds me of a 1978 Cutlass I owned in 1985!

I ordered a new black carpet that is designed for the 1957 truck without the tank behind the seat so the carpet will go all the way back for a nice finished look.

1957-Chevrolet-Hot-Rod-Pickup-truck-woofers1

I also need more leg room and as much as I like a good stereo system these woofers has to go. I need to move the seat further back for comfort. I will install 6X9 speakers on each side. More on this later.

The 383 engine had a strange shaking going on around 1500 rpm. It ran strong but I don’t really have time to investigate. It is an internally balance stroker kit and it has the correct ring gear and harmonic dampener. Go figure…

1957-Chevrolet-Hot-Rod-Pickup-truck-350-engine

Ah, screw it! I took the easy way out for now: THE VISA card!!! For 1200 clams ! I got this new, not rebuilt, Chevrolet 350 crate engine. 1200 clams delivered…in a crate.

 

1957-Chevrolet-Hot-Rod-Pickup-truck-700R4-trans

The truck was equipped with a 700R4. I thought I was burning rubber at WOT but it was actually the transmission slipping! I replaced it with a pro-rebuilt 30 spline 700R4 with a 2000 rpm stall converter. I also got a lesson in how to set up the cable that communicates with the transmission.

Blackie

 

 

 

 

 

 

 

 

 

“Blackie”

Instead of installing tons of chrome (or any at all) I decided to go all black instead. Even the aluminum Air Gap intake got covered in the dark stuff. I am tired of chromed-out small blocks so the least I can do is to avoid that cliché. For contrast all bolts will be polished stainless. The funky bracket on the left side is for the A/C compressor. It is using one of the water pump bolts so I mocked up the compressor when installed the water pump and then I installed the bracket. I don’t like to loosen up the water pump bolts after the fact.

1957-Chevrolet-truck-Hot-Rod-power-steering-rack

The Mustang rack on the truck showed signs of leaking and it had some slack. Rack & Pinions should NOT have any slack so out with the old and in with a new…rack that is!

1957-Chevrolet-truck-Hot-Rod-tilt-column

The steering olumn in the truck was sloppy so this new unit will take its place. As much as I don’t care for the look of a tilt column I find them adding to comfort in a small cab as this truck. This is going to be a driver so comfort is the key! It will have a leather steering wheel.

Air-cond-controls

The truck had no heater at all and since this is going to be a driver I want A/C as well. Vintage Air supplied a complete behind dash unit and I opted for the Deluxe controls. They have the OE look and are now fly-by-wire, no more cables. Me dig!

So much for a quicky, eh?

1957-Chevrolet-truck-Hot-Rod-engine-bay-side

The engine compartment was cleaned up and the frame paint was freshened up.

1957-Chevrolet-truck-firewall

While the engine was out I drilled all the holes needed for the Vintage Air hoses.

1957-Chevrolet-truck-Hot-Rod-engine-ready

Open wide!

1957-Chevrolet-truck-engine-in

…and there she is. I should not be too far away from making some noise!

1957-Chevrolet-truck-front-suspension

I am not totally impressed with this TCI front end.  Even if you tighten the bejesus out of the A arms bolts there is a risk they can slip under load. I welded on these sturdy half inch plates with “set bolts”. Once the alignment is done I will run those bolts out firmly against the A-arm rod making sure everything stays where it should.

 

1957-Chevrolet-truck-engine

Plumbing and wiring is pretty much done. Now it’s time for the A/C / Heat combo under the dash.

1957-Chevrolet-truck-aircond

With all the tubes attached the evaporator is ready to go in. The round thingies on top are servos for the doors that directs the air flow. No cables are need with this fly by wire set up.

 

1957-Chevrolet-truck-steering-column

I replaced the tilt column but I can’t live with these faux “billet” knobs. They are not even billet, they are just cast cheap looking things. I will replace them with black OE looking knobs or something like that.

1957-Chevrolet-truck-shocks

The front shocks were very soft so I opted for the best in the business. Bilsteins.

1957-Chevrolet-truck-frame

One benefit with buying an old street rod is that everything is all cleaned up and painted with fresh components. Another…ahem benefit is that you will enjoy the previous owner’s fine work…or not. This “worm nest” worth of wires is a not anything I can live with.

He bought a new wiring kit but it seems like he was not big on cutting the wires when they were too long. Gotta fix that!

1957-Chevy-truck-clean-wiring

After cleaning up the wiring I can put a bed back in this thing.

1957-Chevy-truck-tail-light

The new rear bumper looks nice but I am not liking the tail lights flopping in the wind. I want something more integrated.

1957-Chevy-truck-LED-light

These are trailer lights designed for enclosed car trailers. They are usually mounted vertically. It turns out that they fit perfectly on the panel below the tailgate.

1957-Chevy-truck-tail-lights

They are very bright, both in running light mode…

1957-Chevy-truck-LEd-bright

…and brake mode. I am straying fom my traditional rules here but since this is going to be a driver in soggy ass Seattle winter weather I want to be seen when I step on the binders.